Question 1

HPA Why HPA ?

Accepted Answer

Nomally , HPA or PCP can filling compressed Air and N2 are both gasses that go in HPA paintball tanks. HPA or PCPstands for High Pressure Air. Nitrogen and Compressed Air are both high pressure gasses. These gases are cleaner, and expand much faster than co2, which as you may know can be pretty inconsistent and crappy in cold weather. You can get HPA or PCP tanks filled by a high output air compressor(which are powered by gas or electricity), or a full scuba tank. Normal $50 air compressors will not work, they only output at 0-125psi, and HPA paintball tanks operate at 3000-4500 psi..
 
All HPA or PCPtanks come with a built in regulator that will feed 0-800psi to the gun. Some tanks however have regulators that are fixed to feed at 500psi, so if you were to use it on a which needs 650-800psi to operate correctly your would not work. Likewise, using an HPA or PCP tank with a fixed output of 800psi could spell trouble if you have a low pressure at GBB or paintball gun that operates at 250-450psi.

Question 2

Does the co2 is purity 99.9% ?

Accepted Answer

Yes it is.

Question 3

How can i change the seal(o-ring) of the valve ?

Accepted Answer

You should provide your products number and we will offer the suitable sealand  the special lube before to install .

Question 4

Where of the airsoft gun need to lubricating?

Accepted Answer

Slide , Trigger and spring .

Question 5

Why Gas Cans Shouldn't Be Left in Your Car ?

Accepted Answer

Hair spray, lubricants, flat tire repair, window cleaners, and gas are often kept in vehicles year round. Some are kept in car trunks or in metal tool boxes in the back of vans and trucks.
These pressurized containers are often temperature sensitive and classified as either flammable or combustible. Yet they are so commonly used, we forget the hazards that are associated with them.
For example, most aerosols state on the label of the container to not store them in temperatures greater than 120 degrees F. During summer months in most places around the United States, outside air temperatures will exceed 90 degrees F while the temperatures inside a vehicle or a toolbox on a vehicle can exceed 130 degrees F. Without additional ventilation or temperature relief, these containers can become explosive.

Question 6

How many MPA of the co2 ?

Accepted Answer

It is 5.5Mpa .

Question 7

How can I storage the gas can ?

Accepted Answer

Temperature
Store flammable aerosol cans at or below room temperature, which is around 65 degrees Fahrenheit. You don't want to freeze the material since freezing causes expansion and can potentially puncture the side of the can. Instead, shoot for a temperature range between 45 and 65 degrees Fahrenheit. This cool temperature storage will ensure that the contents of the can are viable but that any accidental leaks will not be ignited by sudden sparks or high temperatures. A humid or moist environment can also help since moisture in the air will prevent unexpected sparks.
 
Storage Space
Do your best to separate the aerosol cans from other storage materials as well as from any fixtures that feature high temperatures or flames. Never store flammable aerosol cans in a basement or similar area that features hot water heaters, gas heaters, fireplaces, boilers or any other type of intense heat. You should also keep them away from high voltage areas or anywhere that an unexpected spark could ignite. While the cans themselves protect the flammable aerosol product from exposure to such temperatures and sparks, a leak or sudden flame could cause a catastrophic fire. And keep them away from any pointed edges or corners even if it's only furniture with sharp edges. These points will puncture a can and can result in a dangerous spray of flammable liquid.
 
Can Rotation
Store your cans so that you ensure that you use open cans and older cans first. Much like using food products, this type of rotation will cut back on the number of cans you have (since you will use up an open one before opening a new one) and will prevent the materials from going bad. Depending on the type of material inside the can, the longer it sits, the more likely it is to gradually degrade the can. If you suspect that your can is not sturdy or that the material within cannot be safely used, dispose of it as hazardous waste.
 
Safety Cabinets
Many companies sell safety cabinets designed to handle aerosols, which might be a worthwhile investment if you keep a lot of paint or chemicals on hand in these cans. Keep these cabinets in a cool, dry area and away from direct sunlight or any ignition sources. Only open the cabinet when you need to put in or take out an aerosol can; leaving the cabinets open exposes the cans to greater risk. Use labels or notes to keep track of what each can is for and when it was placed into the cabinet so that you can effectively rotate stock and use the chemicals correctly.

Question 8

What lubricants will better ?

Accepted Answer

It suggest to using Ultraforce Silicone spray , it is general purpose lubricants in 
Gun parts .

Question 9

If the guage pin not moving , that mean?"

Accepted Answer

It mean broke.

Question 10

Types of HPA Tanks

Accepted Answer

HPA paintball tanks are made out of aluminum, steel or carbon fiber. Steel HPA tanks are hella heavy. Aluminum tanks may be cheaper, but Carbon fiber tanks have a higher pressure capability which means they will supply more usable air to your paintball gun. The best way to go is carbon fiber, its lightweight and durable. More on why you should buy a carbon fiber tank over anything else.

Question 11

Your lubricants safe with plastic ?

Accepted Answer

Yes, our all lubricants had been testing to 32 kind of the plastic and rubber material.

Question 12

Sizes of HPA Paintball Tanks

Accepted Answer

What confuses many players is the two numbers in the name of an HPA tank. For instance, what does “50ci 4500psi HPA Tank” mean? CI represents Cubic Inch, which represents the volume of the tank. The larger the number the more shots you can expect from the tank. PSI stands for Pounds Square Inch, which is the pressure the tank can be filled to.

Question 13

Do your had the lubricants in gas ?

Accepted Answer

Yes, it will included our special safe plastic lubricants in the gas

Question 14

How many g in cartridges ?

Accepted Answer

12g

Question 15

Why my gauge or valve spill out the gas ?

Accepted Answer

It maybe your thread still not tightened or the seal(o-ring) broke.

Question 16

How many shots can i get from the tank ?

Accepted Answer

• 13ci 3000psi HPA tank = 160 paintballs
 • 45ci 4500psi HPA tank = 830 paintballs
 • 47ci 3000psi HPA tank = 580 paintballs
 • 48ci 3000psi HPA tank = 590 paintballs
 • 48ci 4500psi HPA tank = 880 paintballs
 • 50ci 3000psi HPA tank = 615 paintballs
 • 50ci 4500psi HPA tank = 920 paintballs
 • 56ci 4500psi HPA tank = 1030 paintballs
 • 62ci 3000psi HPA tank = 760 paintballs
 • 68ci 3000psi HPA tank = 840 paintballs
 • 68ci 4500psi HPA tank = 1250 paintballs
 • 70ci 4500psi HPA tank = 1230 paintballs
 • 88ci 4500psi HPA tank = 1620 paintballs
 • 90ci 4500psi HPA tank = 1660 paintballs

Question 17

What the different of the Top/ Red / Black Gas /Camo Gaas?

Accepted Answer

Normally , the they are the different pressure between and the weather uses different . Like Camo Gas is winter can be stable provide 8Kgs power , Top gas is 12Kg , red gas 14Kg and blact gas is 18kg in 20c degree .

Question 18

It is dangerous products ?

Accepted Answer

Yes , it is Class 2.2 non flammable gas product .

Question 19

How can I know the valve install tightened and operated ?

Accepted Answer

You could dip the valve in water to check , if you not sure .

Question 20

Recommended HPA Tanks

Accepted Answer

One of the best HPA carbon fiber tank. For the last couple years it have been proving that quality service combined with a quality product is enough to produce a sustainable competitive advantage against larger paintball companies. We make great tanks that perform flawlessly, are affordable, and can easily be switched from low pressure output to high pressure output.

Question 21

DO YOU TEST ANY OF YOUR CHEMICAL PRODUCTS ON ANIMALS?

Accepted Answer

No our products are not tested on animals

Question 22

How many shots of one top gas with 0.25mm BB?

Accepted Answer

It had 2500 shots of can with piston and above 0.12g of each shot.

Question 23

Can it left in car ?

Accepted Answer

No , all the gas products was not suggest left in car.

Question 24

Does I need too change the gas in winter?

Accepted Answer

Yes, it because the gas pressure will change when the weather change.
We suggest to use our Camo Gas in winter.

Question 25

Why Gas Cans Shouldn't Be Left in Your Car ?

Accepted Answer

Hair spray, lubricants, flat tire repair, window cleaners, and gas are often kept in vehicles year round. Some are kept in car trunks or in metal tool boxes in the back of vans and trucks.
These pressurized containers are often temperature sensitive and classified as either flammable or combustible. Yet they are so commonly used, we forget the hazards that are associated with them.
For example, most aerosols state on the label of the container to not store them in temperatures greater than 120 degrees F. During summer months in most places around the United States, outside air temperatures will exceed 90 degrees F while the temperatures inside a vehicle or a toolbox on a vehicle can exceed 130 degrees F. Without additional ventilation or temperature relief, these containers can become explosive.

Question 26

How can I storage the gas can ?

Accepted Answer

Store flammable aerosol cans at or below room temperature, which is around 65 degrees Fahrenheit. You don't want to freeze the material since freezing causes expansion and can potentially puncture the side of the can. Instead, shoot for a temperature range between 45 and 65 degrees Fahrenheit. This cool temperature storage will ensure that the contents of the can are viable but that any accidental leaks will not be ignited by sudden sparks or high temperatures. A humid or moist environment can also help since moisture in the air will prevent unexpected sparks.

Storage Space

Do your best to separate the aerosol cans from other storage materials as well as from any fixtures that feature high temperatures or flames. Never store flammable aerosol cans in a basement or similar area that features hot water heaters, gas heaters, fireplaces, boilers or any other type of intense heat. You should also keep them away from high voltage areas or anywhere that an unexpected spark could ignite. While the cans themselves protect the flammable aerosol product from exposure to such temperatures and sparks, a leak or sudden flame could cause a catastrophic fire. And keep them away from any pointed edges or corners even if it's only furniture with sharp edges. These points will puncture a can and can result in a dangerous spray of flammable liquid.

Can Rotation

Store your cans so that you ensure that you use open cans and older cans first. Much like using food products, this type of rotation will cut back on the number of cans you have (since you will use up an open one before opening a new one) and will prevent the materials from going bad. Depending on the type of material inside the can, the longer it sits, the more likely it is to gradually degrade the can. If you suspect that your can is not sturdy or that the material within cannot be safely used, dispose of it as hazardous waste.

Safety Cabinets

Many companies sell safety cabinets designed to handle aerosols, which might be a worthwhile investment if you keep a lot of paint or chemicals on hand in these cans. Keep these cabinets in a cool, dry area and away from direct sunlight or any ignition sources. Only open the cabinet when you need to put in or take out an aerosol can; leaving the cabinets open exposes the cans to greater risk. Use labels or notes to keep track of what each can is for and when it was placed into the cabinet so that you can effectively rotate stock and use the chemicals correctly.

Question 27

Can I refill the cartridges ?

Accepted Answer

Yes, if your cartridges is refillable

Question 28

What the different of the Top/ Red / Black Gas /Camo Gaas?

Accepted Answer

Normally , the they are the different pressure between and the weather uses different . Like Camo Gas is winter can be stable provide 8Kgs power , Top gas is 12Kg , red gas 14Kg and blact gas is 18kg in 20c degree .

Question 29

Do your had the lubricants in gas ?

Accepted Answer

Yes, it will included our special safe plastic lubricants in the gas

Question 30

How many shots of one top gas with 0.25mm BB?

Accepted Answer

It had 2500 shots of can with piston and above 0.12g of each shot.

Question 31

Does I need too change the gas in winter?

Accepted Answer

Yes, it because the gas pressure will change when the weather change.
We suggest to use our Camo Gas in winter.

Question 32

Does the co2 is purity 99.9% ?

Accepted Answer

Yes it is.

Question 33

How many MPA of the co2 ?

Accepted Answer

It is 5.5Mpa .

Question 34

How many 12g in cartridges ?

Accepted Answer

12g net weight

Question 35

It is dangerous products ?

Accepted Answer

Yes , it is Class 2.2 non flammable gas product .

Question 36

Can it left in car ?

Accepted Answer

No , all the gas products was not suggest left in car.

Question 37

How can i change the seal(o-ring) of the valve ?

Accepted Answer

You should provide your products number and we will offer the suitable seal and the special lube before to install .

Question 38

Can I refill the cartridges ?

Accepted Answer

Yes, if your cartridges is refillable

Question 39

If the guage pin not moving , that mean?"

Accepted Answer

It mean broke.

Question 40

Why my gauge or valve spill out the gas ?

Accepted Answer

It maybe your thread still not tightened or the seal(o-ring) broke.

Question 41

How can I know the valve install tightened and operated ?

Accepted Answer

You could dip the valve in water to check , if you not sure .

Question 42

Where of the airsoft gun need to lubricating?

Accepted Answer

Slide , Trigger and spring .

Question 43

What lubricants will better ?

Accepted Answer

It suggest to using Ultraforce Silicone spray , it is general purpose lubricants in 
Gun parts .

Question 44

Your lubricants safe with plastic ?

Accepted Answer

Yes, our all lubricants had been testing to 32 kind of the plastic and rubber material.

Question 45

Why HPA /PCP?

Accepted Answer

Nomally , HPA or PCP can filling compressed Air and N2 are both gasses that go in HPA paintball tanks. HPA or PCPstands for High Pressure Air. Nitrogen and Compressed Air are both high pressure gasses. These gases are cleaner, and expand much faster than co2, which as you may know can be pretty inconsistent and crappy in cold weather. You can get HPA or PCP tanks filled by a high output air compressor(which are powered by gas or electricity), or a full scuba tank. Normal $50 air compressors will not work, they only output at 0-125psi, and HPA paintball tanks operate at 3000-4500 psi..
All HPA or PCPtanks come with a built in regulator that will feed 0-800psi to the gun. Some tanks however have regulators that are fixed to feed at 500psi, so if you were to use it on a which needs 650-800psi to operate correctly your would not work. Likewise, using an HPA or PCP tank with a fixed output of 800psi could spell trouble if you have a low pressure at GBB or paintball gun that operates at 250-450psi.

Question 46

Types of HPA Tanks

Accepted Answer

HPA paintball tanks are made out of aluminum, steel or carbon fiber. Steel HPA tanks are hella heavy. Aluminum tanks may be cheaper, but Carbon fiber tanks have a higher pressure capability which means they will supply more usable air to your paintball gun. The best way to go is carbon fiber, its lightweight and durable. More on why you should buy a carbon fiber tank over anything else.

Question 47

Sizes of HPA Paintball Tanks

Accepted Answer

What confuses many players is the two numbers in the name of an HPA tank. For instance, what does “50ci 4500psi HPA Tank” mean? CI represents Cubic Inch, which represents the volume of the tank. The larger the number the more shots you can expect from the tank. PSI stands for Pounds Square Inch, which is the pressure the tank can be filled to.

Question 48

How Many Shots Can I Get From a HPA tank ?

Accepted Answer

• 13ci 3000psi HPA tank = 160 paintballs
 • 45ci 4500psi HPA tank = 830 paintballs
 • 47ci 3000psi HPA tank = 580 paintballs
 • 48ci 3000psi HPA tank = 590 paintballs
 • 48ci 4500psi HPA tank = 880 paintballs
 • 50ci 3000psi HPA tank = 615 paintballs
 • 50ci 4500psi HPA tank = 920 paintballs
 • 56ci 4500psi HPA tank = 1030 paintballs
 • 62ci 3000psi HPA tank = 760 paintballs
 • 68ci 3000psi HPA tank = 840 paintballs
 • 68ci 4500psi HPA tank = 1250 paintballs
 • 70ci 4500psi HPA tank = 1230 paintballs
 • 88ci 4500psi HPA tank = 1620 paintballs
 • 90ci 4500psi HPA tank = 1660 paintballs

Question 49

Recommended HPA Tanks

Accepted Answer

One of the best HPA carbon fiber tank. For the last couple years it have been proving that quality service combined with a quality product is enough to produce a sustainable competitive advantage against larger paintball companies. We make great tanks that perform flawlessly, are affordable, and can easily be switched from low pressure output to high pressure output.